Valves - Page 6 - Blowout Sale! Save up to 83%
Blowout Sale! Up to 83% off on Valves at Elite Apprenticeships, Page 6. Top brands include Duda Energy, Smith-Cooper International, Valterra, Two Little Fishies, Control Devices, Kerick Valve, Malida, SPX Waukesha, Lutz, Numatics, & Hayward Flow Control. Hurry! Limited time offers. Offers valid only while supplies last.
Duda Energy 2PCBV-WOG200-F050 Full Port Ball Valve, 1/2" NPT, 2 Piece, 304 Stainless Steel with Blue Vinyl Handle.5"
You Save: 25%
mpn: 2PCBV-WOG200-F050, ean: 0840194100007,
4.7 out of 5 stars with 132 reviews
2-Piece Stainless steel ball valves with PTFE seals & seats by Duda Energy Duda Energy Stainless steel ball valves with PTFE (Teflon) seats & seals offer excellent corrosion resistance for most applications. Stainless steel & PTFE work well in applications including but not limited to water, oil, gas/air, light alkali's and acids, biodiesel, fuels and alcohols. These ball valves are fitted with tight seals to ensure no leakage and a long lasting seal after many years of frequent usage. All
Smith-Cooper International 8135 Series Brass Ball Valve, Inline, Lever Handle, 2" NPT Female, Non-Potable Water Use Only
By Smith-Cooper International
mpn: 01728135N, ean: 0092201345530,
4.2 out of 5 stars with 142 reviews
The Smith-Cooper International 8135 series brass inline ball valve has a lever handle and National Pipe Taper (NPT) female threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This valve has a lever handle for manual on/off control. Polytetrafluoroethylene (PTFE) seats reduce the risk of leakage. The valve is standard port for
Valterra 200-C15 PVC Swing/Spring Combination Check Valve, Clear, 1-1/2" Slip
You Save: 53%
mpn: 200-C15, ean: 0753610336952,
4.5 out of 5 stars with 117 reviews
This Valterra 200-C15 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 1-1/2'' slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring
Two Little Fishies ATL5455W Ball Valve, 3/4-Inch
You Save: 57%
mpn: 481510, ean: 0748172545027,
4.1 out of 5 stars with 18 reviews
Barbed Aquatic Ball Valves for regulating water flow through standard hose used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.Two Little Fishies Ball Valve. Barbed Aquatic Ball Valves for regulating water flow. Used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.
Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT
mpn: ST25-1A150, ean: 0094700405128,
4.1 out of 5 stars with 19 reviews
This Control Devices ST25-1A150 ASME safety valve has a brass body, a 150 psi relief pressure, a 1/4'' male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the
Kerick Valve MA052 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/2" NPT Male
You Save: 19%
mpn: MA052, ean: 0789164274709,
4.2 out of 5 stars with 22 reviews
This Kerick MA052 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093'' orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi. The valve inlet has 1/2'' NPT male extended threads with a sealing washer and jam nut for mounting through a tank wall, and the valve outlet is free flowing. The valve is made of National Sanitation Foundation (NSF)
Malida FBA_646455 Water Filter Float Ball Valve,or Fish Aquarium Uses 1/4 Inch Supply Tube.
mpn: FBA_646455, ean: 0712641079320,
4.3 out of 5 stars with 27 reviews
Plastic float valve automatically start and stop water flow. The float is adjustable to allow you to control the water height. Estimated rate of flow up to 1.5 gpm at 60 psi PVC for corrosion resistance Tank mount with extended threads on inlet side of valve for mounting through tank wall Includes 1x4'' float ball attached to adjustable valve shutoff arm 1/4'' Tube push inlet and free-flow outletSuitable for Reverse Osmosis System,Fish Aquarium,etc. PVC for corrosion resistance，Top
Lutz Snap Ring
4.3 out of 5 stars with 45 reviews
Lutz snap ring.
Lutz Pressure Ring
4.1 out of 5 stars with 39 reviews
Lutz pressure ring.
4.0 out of 5 stars with 27 reviews
Numatics MK2012-12L Valve Bonnet Spring 3-30 psi
4.5 out of 5 stars with 60 reviews
Numatics bonnet spring is for use with 2012 series solenoid pilot actuated valves has measuring range of 3 - 30 psi Brand Name|Numatics#MFR Part Number|MK2012-12L#UNSPSC|40141616#Item|Bonnet Spring#Suitable For Use With|2012 Series Solenoid Pilot Actuated Valves#Specifications|3 - 30 psiBrand Name|Numatics#MFR Part Number|MK2012-12L#UNSPSC|40141616#Item|Bonnet Spring#Suitable For Use With|2012 Series Solenoid Pilot Actuated Valves#Specifications|3 - 30 psi.
Numatics 113-278 Valve Gasket, For Use With MK 8 Series Solenoid Valve
4.7 out of 5 stars with 54 reviews
Numatics gasket is for use with Mark 8 series direct solenoid actuated valves Brand Name|Numatics#MFR Part Number|113-278#UNSPSC|40141616#Item|Gasket#Suitable For Use With|Mark 8 Series Direct Solenoid Actuated Valves#Standard/Approvals|UL Listed, CSA, CE CertifiedBrand Name|Numatics#MFR Part Number|113-278#UNSPSC|40141616#Item|Gasket#Suitable For Use With|Mark 8 Series Direct Solenoid Actuated Valves#Standard/Approvals|UL Listed, CSA, CE Certified.
Hayward QVC1005SSEW Series QVC Compact Ball Valve, Socket End, White, 1/2" Size
You Save: 83%
4.1 out of 5 stars with 22 reviews
Suitable for use in light-duty water applications, this ball valve can be used with Schedule 40/80 pipe and fittings. The 1-pc. design requires no ball/seat adjustment. Ball Valve, Body Material PVC, Body Style Inline, 1-Piece, Pipe Size 1/2 In., Connection Type Socket x Socket, Full Port, Max. Pressure 150 psi CWP, Temp. Range 34 Degrees to 140 Degrees F, Ball Material PVC, Seat Material Santoprene, Stem Type Blowout Proof, Handle Type Tee, Handle Material ABS, Stem Material PVC, Body Seal