Abrasive Accessories - Page 2 - Huge Savings! Save up to 17%

Huge Savings! Up to 17% off on Abrasive Accessories at Elite Apprenticeships, Page 2. Top brands include EuroTool, LittleMachineShop.com, Makita, Norton Abrasives - St. Gobain, Dedeco, Commando Products, Inc., CLEMCO, Lyndex-Nikken, Briney Tooling Systems, STADEA, Bolton Tools, Unger, Albrecht, hothuimin, Performance Abrasives, Nitto Kohki, Aircraft Tool Supply, Techniks, & Merit. Hurry! Limited time offers. Offers valid only while supplies last.

Miniature Screw Mandrel, Plain, 3/32 Inch, Pack Of 12 | BRS-274.00
By EuroTool
In Stock

mpn: BRS-274.00, ean: 0654207123866,

4.8 out of 5 stars with 68 reviews
Good quality, European-made nickel mandrels assure the user satisfaction with every use. Available in both 3/32'' and 1/8'' shank and a variety of styles. Screw-type mandrels offered in regular and reinforced, work with unmounted wheels, stones, miniature brushes, etc. Threaded mandrels ideal for rubberized abrasives and buffs. All sold by the dozen.Great for work with unmounted wheels, stones, brushes and more. Made with nickel. Made in Europe. Pack of 12. 3/32 inch shank.

Split Mandrel, Straight, 3/32 Inch, Pack Of 12 | BRS-278.50
By EuroTool
In Stock

mpn: BRS-278.50, ean: 0654207123965,

4.4 out of 5 stars with 104 reviews
Straight mandrels with split for sanding papers. 3/32'' shank. Sold per dozen.Great for use with sanding papers. Made of stainless steel. Straight split mandrel. 3/32 inch shank. Includes 12 mandrels.

Collet Set, 3MT, Set of 7
By LittleMachineShop.com
In Stock

mpn: 1615,

4.2 out of 5 stars with 58 reviews
Set of seven 3 Morse taper round collets. Made of high grade tool steel these collets have been hardened and ground to close tolerance. Includes seven 3MT collets sizes: 1/8'', 3/16'', 1/4'', 3/8'', 1/2'', 5/8'', and 3/4''.Set of seven 3 Morse taper round collets. 1/8 - 3/4'' x 8ths & 3/16''. Drawbar Thread: 3/8''-16TPI. Made of high grade tool steel. Hardened and ground to close tolerance.

Makita 346449-3 and 251314-2 (2 Pack) Belt Hooks for Cordless Tools
By Makita
In Stock
You Save: 1%

mpn: 346449-3, 251314-2, ean: 0693892572641,

4.4 out of 5 stars with 36 reviews
Makita (2 Pack) Belt Hooks for Cordless Tools2 Pack. Includes: (2) Belt Hooks and (2) Screws. 346449-3 Replaces: 324705-1, 346034-2, 346317-0 and 324553-8. Fits: BDA350, BDF343H, BDF451, BDF451Z, BDF452, BDF452HW, BDF453, BDT132, BHP451, BHP452, BHP454, BST221, BTD130FW, BTD140, BTD141, BTD141Z, BTD142, BTD144, BTD144Z, BTL061, BTL063, BTP140, BTW251, LXDT01. LXDT04, LXDT04CW, LXDT08, LXDT08Z, LXFD01, LXFD01CW, LXFD01Z, LXPH01, LXPH01CW, LXPH03, LXPH05, LXPH05Z, LXSF01, LXSF01Z, XDT11R, XFD07M,

Norton Single Point Diamond Dressing Tool, Non-Resettable BC, 7/16" Diameter, 1/2 ct Weight (Pack of 5)
By Norton Abrasives - St. Gobain
In Stock

mpn: 66260195005, ean: 0662601950056,

4.9 out of 5 stars with 31 reviews
The norton line of single point diamond tools sets the industry standard for straight and simple form dressing applications. It includes: resettable and non-resettable products, tools for all abrasive types (conventional and advanced ceramic grains) and the technology-leading norton indexable tool design. Used for 11'' to 14'' wheel diameter.Sharp, long-lasting diamondĀ forĀ long life, and fast truing and dressing action^Consistent performance from tool to tool^Steeper 60 degrees included head

Dedeco 0126 Mandrel Cone, 1/4"
By Dedeco
In Stock

mpn: 126, ean: 0792818301263,

4.9 out of 5 stars with 138 reviews
Mandrel - Cone.1/4'' x 1/4''. Specially designed for Dedeco Industrial Rubberized Abrasive Cones. Also works with Cratex Cones.

Commando Grinding Wheel Dresser with Flat Diamond Coated Surface for Truing Grinding & Deburring Wheels
By Commando Products, Inc.
In Stock
You Save: 17%

mpn: 167-8101, ean: 7131405268481,

4.5 out of 5 stars with 100 reviews
Move diamond head back & forth across the grinding or deburring wheel to obtain a smooth flat surface. >>> SUGGESTED USES: Dress and true small to medium size grinding wheels, abrasive wheels or deburring wheels to obtain a flat working surface. Make a great GiftFlat diamond surface helps dress grinding & abrasive deburring wheels to a true flat surface. Makes dressing grinding wheels quick and easy by moving diamond surface across wheel. Diamond surface 1/2'' x 1-3/4'' with a overall tool

Tear away lens for Clemco Apollo 600 helmet, 25 lenses per pack
In Stock
You Save: 14%

mpn: 4361,

4.5 out of 5 stars with 60 reviews
tear away lens for Clemco Apollo 600 helmet, 25 lenses per pack.

Lyndex E16-EXT-750 ER16 Straight Shank Collet Chuck Extension, 0.019" - 0.406" Collet Range, 3/4" Diameter x 5.89" Length
By Lyndex-Nikken
In Stock
You Save: 17%

mpn: E16-EXT-750, ean: 0201302617204,

4.7 out of 5 stars with 91 reviews
Lyndex ER16 straight shank collet chuck extension It uses a ER11-3 back up screw. 0.019-inches - 0.406-inches collet range. Measures 3/4-inches diameter by 5.89-inches length.ER16 straight shank collet chuck extension. It uses a ER11-3 back up screw. 0.019-inches - 0.406-inches collet range. Measures 3/4-inches diameter by 5.89-inches length.

Briney Tooling Systems V40E-125-200 Cat40 End Mill Adapter, 1-1/4" Item Diameter x 1.75" Projection Stub Length
By Briney Tooling Systems
In Stock

mpn: V40E-125-200,

4.6 out of 5 stars with 60 reviews
Briney's Tru-Postion side lock end mill adapters are ground eccentrically guaranteeing 0.0002'' or better T.I.R. at 4-times length to diameter ratio. Giving you twice the tool life you can get with any other standard side lock end mill adapter. Less run out for even chip load and less chance of chatter.0.0002'' or better runout guaranteed. 0.06 case depth for extended wear. Proudly made in Michigan. Fine thread forged Weldon screw.

STADEA Premium Grade Wet 4" Diamond Polishing Pads 8 Pcs Set For GRANITE MARBLE STONE Polish
In Stock

mpn: DPPW04STDA50BB8P, ean: 0841674104270,

4.1 out of 5 stars with 147 reviews
Stadea Series Standard A, 4'' diamond polishing Pads 8 Pcs set is a great value, professional grade starter pad for concrete polishing, granite polishing, marble polishing. Concrete Marble Granite Polishing It has outstanding finish on concrete countertop flat surface, contoured surface, edge polishing, concrete floor polishing. It has excellent finish on marble flat surface, edges, floor polishing. It works equally well on softer stone, Travertine Terrazzo and glass polishing. It has very good

Bolton Tools Horizontal and Vertical Super Indexing Space | CS-6
By Bolton Tools
In Stock

mpn: CS-6, ean: 0789099524962,

4.4 out of 5 stars with 148 reviews
Bolton tools CollectsCS-6.

Unger HU450 Hold Up 18quot; Tool Holder
By Unger
SKU: #174298
In Stock
You Save: 13%

sku: 174298, mpn: HU450, ean: 0761475624527,

4.7 out of 5 stars with 120 reviews
Unger HU450 Hold Up 18quot; Tool HolderManufacturer: Unger.

Albrecht 73040 Cp130-r8 Iintgl Shan Albrecht Drill Chucks
By Albrecht
In Stock

mpn: 73040, ean: 0662636730401,

4.1 out of 5 stars with 145 reviews
Albrecht manufactures keyless drill chucks, milling chucks, collets, arbors, and other machine tool accessories. The company, founded in 1908 in Stuttgart, Germany, has U.S. headquarters in Hauppauge, NY. Albrecht meets International Organization for Standardization (ISO) standards 9001 and 10000451.Price For: Each Item: Drill Chuck Chuck Type: Keyless Bearing Type: Ball Bearing Material: steel Nominal Capacity: 1/2'' Mounting Size: R8 Capacity Min.: 0.0312'' Capacity Max.: 0.500'' Mounting

338pcs Sanding Drum Kit with Free Box fits Dremel Includes Rubber Drum Mandrels - 1/2, 3/8 & 1/4"#21-MST
By hothuimin
In Stock

ean: 6091263628685,

4.6 out of 5 stars with 30 reviews
Sanding bands size: 1/2 inch, 3/8 inch and 1/4 inch. Sanding bands material: aluminum oxide. Package includes: 1/2 Inch sanding bands x 81pcs sanding grits(each 27pcs of 60 grit, 120 grit, 320 grit) 3/8 Inch sanding bands x 68pcs sanding grits(each 34pcs of 60 grit, 320 grit) 1/4 Inch sanding bands x 180pcs sanding grits(each 60pcs of 60 grit, 120 grit, 320 grit) 1/2 Inch drum mandrels x 3pcs 3/8 Inch drum mandrels x 3pcs 1/4 Inch drum mandrels x 3pcs Free plastic box x 1High Function: Turn

Performance Abrasives New Wave 2" Scruff & Buff Ball 180 Grit Green
By Performance Abrasives
In Stock

mpn: 02SBGRN2,

4.3 out of 5 stars with 81 reviews
Hand sanding is tough labor, something that most woodworking and woodturning projects require, but everyone seeks to avoid. New Wave Scuff & Buff Balls are a great alternative. The patented wavy edge design insures consistent finishing quality, and the continuous exposure of new grit means the uniformity of the Scuff Ball does not change. The material allows highly efficient airflow, resists clogging, and leaves the Scuff Ball easy to clean by water or compressed air.2''-diameter New Wave

Nitto Kohki JC-16 Needle Scaler with Multi-Needles
By Nitto Kohki
In Stock

mpn: JC-16,

4.0 out of 5 stars with 9 reviews
Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the work piece through the high speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.Lightweight Model. Quickly and efficiently removes weld slag, rust, paint and scale from most surfaces. Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many other materials. Heavy-duty construction for

Aircraft Tool Supply Magneto P-Lead Adapter (Early S2, S4, S20)
By Aircraft Tool Supply
In Stock

mpn: 8765,

4.4 out of 5 stars with 86 reviews
For Bendix Early S-20, S-4, and S-6 Magnetos having a .375'' diameter by 1.1'' long lead. (see table below for other magneto types). This unique design of the P-lead adapter ensures proper spring pressure against the internal contact. It provides secure and stable alignment, and includes a post that prevents the timer leads from falling off. This adapter allows you to connect to the timer leads of all Bendix magnetos with an immediate and positive connection. One pair per package..

Techniks BT30 ER32 x 60 Collet Chuck x 41mm Length
By Techniks
In Stock

mpn: TEC-16121, ean: 0650229407854,

4.5 out of 5 stars with 45 reviews
Techniks BT30 ER32 x 60 Collet Chuck x 41mm LengthOur part # TEC-16121. Balanced to 25,000 RPM at G2.10. For use with CNC routers. PowerCOAT coolant nut included. Use ''Power Coat'' nuts to increase the holding power and safety of your tool holders. High holding power extends cutting tool life and improves surface finish.. Inspection report included for accuracy and balance.

Merit Abrasotex Quick-Change Abrasive Disc Holder, Type I, 1" Diameter, 40000 rpm, Grit Medium (Pack of 1)
By Merit
In Stock

mpn: 08834164002, ean: 0088341640024,

4.1 out of 5 stars with 122 reviews
Type I is a snap-on/snap-off system, which enables you to change discs quickly and safely, reducing down time and operating expenses (equivalent to Norton's TP fastener). 1/4'' Shank includedMexico.

Viewing Page 2 of 8

View more products in Abrasive & Finishing Products.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - eliteapprenticeships.com. All Rights Reserved.