3D Printer Parts & Accessories - Super Savings! Save up to 33%


Super Savings! Up to 33% off on 3D Printer Parts & Accessories at Elite Apprenticeships. Top brands include E3D, Wisamic, Anycubic, Bondtech, WINSINN, Wanhao, LulzBot, Sindoh, DOBSTFY, Capricorn, CHPOWER, ExcelFu, Ivelink, kuman, Creality 3D, Creality, Flexion Extruder, & Gulfcoast Robotics. Hurry! Limited time offers. Offers valid only while supplies last.



3DMakerWorld E3D Titan Aero Hotend and Extruder - 1.75mm, 24v, Mounting Bracket, Motor
By E3D
In Stock
$137.56

mpn: E3DAERO-175-24V-BRKT-MOTOR, ean: 0714983339209,

4.9 out of 5 stars with 150 reviews
* Note: This model (E3DAERO-175-24V-BRKT-MOTOR) includes both motor and bracket.Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own.List of what's in the box and user guide: wiki.e3d-online.com/wiki/Titan_Aero.Compact and RigidBy combining a HotEnd and extruder, Titan Aero is ultra compact. It offers you an extra 25mm of Z-axis build height


Wisamic Extension Cable Kits for Creality CR-10 CR-10S CR-10 400 CR-10 500 Series 3D Printer-1 Meter
By Wisamic
In Stock
$20.99
$20.49
You Save: 2%

mpn: H040003,

4.6 out of 5 stars with 56 reviews
Specification: Length - 1M/3.28ft; Weight - total 8.82lbs Compatibility - CR-10 CR-10S CR-10 400 CR-10 500 Series Note Please connect this cable kit with the printer according to the connector instruction. Package content: 1 x Extension cable kitApplication - These set of 3D printer cable kits is used to extend Creality CR-10 Series 3D Printer for longer working distance.. Compatibility - CR-10 CR-10S CR-10 400 CR-10 500 Series. Length - 1M/3.28ft; Weight - total 8.82lbs..


Anycubic POT016 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/500G-Grey (Bottle Random)
By Anycubic
In Stock
$50.00

mpn: POT016, ean: 0605175684569,

4.8 out of 5 stars with 145 reviews
Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 %


Bondtech BMG Extruder - 1.75mm (Left-Hand)
By Bondtech
In Stock
$109.99

mpn: BONDTECH-BMG-175-LH,

4.7 out of 5 stars with 79 reviews
The Bondtech BMG utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications. Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.Bondtech Dual-DriveOur unique


WINSINN 3D Printer Titan Extruder Hotend Kit Driver Feeder for 1.75mm 3mm Nozzle Filament - RepRap Prusa i3 Bowden E3D J-Head V6 Makerbot MK8 MK10 Kossel Delta Universal Upgrade Accessories Part
By WINSINN
In Stock
$19.98

mpn: JCJTITAN, ean: 0686603769058,

4.9 out of 5 stars with 134 reviews
►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament. At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and


Wanhao D7 Box DLP/SLA 3D Printer Control Unit
By Wanhao
In Stock
$149.00

mpn: D7B,

4.2 out of 5 stars with 80 reviews
The Wanhao D7 Box allows your Duplicator 7 to print without the need of a computer. This box has an HDMI output along with a USB port for use with a flash drive. Now you no long need to have a dedicated computer to print with the Duplicator 7! The box also has 4 magnets on the back to allow for easy mounting to metal surfaces. This unit doesn't only work with the Duplicator 7. You can use this with any DLP/SLA printer!USB flash drive support to print without a computer. Compatible with all


LulzBot TAZ AeroStruder Tool Head
By LulzBot
In Stock
$250.00

mpn: KT-CP0128, ean: 0810234030359,

4.9 out of 5 stars with 87 reviews
Precision and versatility come together in the LulzBot TAZ Aerostruder Tool Head, featuring the popular Titan Aero hot end and extruder from E3D. This tool head mounts quickly and easily to your LulzBot TAZ 3D Printer and incorporates a powerful centrifugal fan and 360-degree part cooling for excellent fine detail, bridging, and overhang performance. The Aerostruder prints both rigid and flexible filaments with ease making it a great choice for users that change filament types often.


3DWOX Nozzle (DP 200 ONLY)
By Sindoh
In Stock
$130.00

mpn: RDP14100, ean: 8809368983817,

4.0 out of 5 stars with 65 reviews
Nozzle for 3DWOXNozzle for 3DWOX.


3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12”x12" Square (PACK of 4)
By DOBSTFY
In Stock
$30.99

mpn: 3D Printer ACC - 01, ean: 0613852614983,

4.6 out of 5 stars with 118 reviews
DOBSTFY Brand 3D Printer platform can be suitable for temperature from 80 to 100 Celcius. Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models. Compatible with most Cartesian style 3D printers and most of surface. The build surface size is 12'' x 12'', you can cut it to any size you want. [HOW TO REMOVE THE BUILD SURFACE FROM HEAT PLATE]: Heat the bed to 50~60 Celcius, then use a putty knife or print removal tool gently work blade


Anycubic POT015 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/500G-White (Bottle Random)
By Anycubic
In Stock
$50.00

mpn: POT015, ean: 0605175684576,

4.3 out of 5 stars with 76 reviews
Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: WhiteMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 %


Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
By Capricorn
In Stock
$14.59
$12.39
You Save: 15%

mpn: CXS1751M, ean: 7432114996918,

4.2 out of 5 stars with 35 reviews
Capricorn XS bowden tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flixible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print. Brand: Capricorn Length: 1 Meter ID: 1.95mm ± 0.05mm OD: 4.0mmBrand: Capricorn. Length: 1 Meter. ID: 1.95mm ± 0.05mm. OD: 4.0mm.


CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5
By CHPOWER
In Stock
$11.99

mpn: 3D Printer Accessories for CR-10,

4.2 out of 5 stars with 26 reviews
Description: This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament. Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It


ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer (Bonus: 2pcs hex Key Wrenches)
By ExcelFu
In Stock
$11.59

mpn: EX207, ean: 0637673191317,

4.0 out of 5 stars with 35 reviews
ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle Print Heads and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex key wrenches) Specification of Extruder Tube: Type : Nozzle Throat Compatibility : 3D Printer Outer Thread : M6 Nozzle Throat Outer Diameter:7mm Nozzle Throat Inner Diameter:4mm Teflon Pipe Inner Diameter : 2mm Length : 30mm Filament Diameter : 1.75mm Material : Stainless Steel Specification of Brass




kuman 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap K17
By kuman
In Stock
$39.89

mpn: K17-Printer, ean: 6932083803015,

4.9 out of 5 stars with 135 reviews
Product Specs: (1) Mega 2560 R3 (2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. (3)


2018 Upgraded 12V Heater Bed Aluminum Hotbed Board with Cable Installed Well for CR-10 CR-10S 300x300x400mm and CR-10 S5 500x500x500mm 3D Printer Creality Hot Bed Size 310x310x3mm
By Creality 3D
In Stock
$59.99

mpn: 1, ean: 0608410981478,

4.0 out of 5 stars with 118 reviews
UCHOOSE, a King Professional 3D printer and Printing Parts Store. For High Quality & Good Service, We are diligent to Do Our Best! Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm and CR-10 S5 500x500x500mm ; Specifications: > Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm and CR-10 S5 500x500x500mm 3D Printer > Product process: Aluminum Substrate > Hot Bed Size: 310x310x3mm > Voltage: 12V > Power: 110W Package


Creality MK10 Assembled Extruder Hot End Kit for CR-10 CR-10S S4 S5 3D Printer 1.75mm 0.4mm Nozzle Aluminum Heating Block by Luxnwatts
By Creality
In Stock
$29.90
$19.99
You Save: 33%

mpn: MK10KIT,

4.6 out of 5 stars with 22 reviews
Welcome to order from Luxnwatts for Creality 3D Printer PartsCreality MK10 Assembled Extruder Hot End Kit for CR-10 CR-10S S4 S5 3D Printer 1.75mm 0.4mm Nozzle Aluminum Heating Block Features100% brand new and high quality.Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V 40W. Package List1x Aluminum block1x Heating tube (heating tube 1 m long, 12V /24V 40W)1x 1.75MM 0.4MM


Wisamic Clear Borosilicate Glass Heat Bed 300x300x3mm for 3D Printers Prusa, Tevo Tornado, Mendela, AO Series
By Wisamic
In Stock
$26.99

mpn: H010018, ean: 0714676468636,

4.1 out of 5 stars with 86 reviews
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations. Note Please note that this glass is about 1/4'' short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension. Features: *


3DMakerWorld Flexion Retrofit Kit for Single Extruder (Makerbot Replicator 2)
By Flexion Extruder
In Stock
$165.00

mpn: FLEXION-S-R2, ean: 0714983339407,

4.8 out of 5 stars with 13 reviews
Developed by the inventor of Ninjaflex Drop-in 3D printer extruder retrofit kit for i3-style printers like the Wanhao Duplicator i3. Print with flexible materials, higher resolution, and fewer failures. Also prints ABS and PLA better than your stock extruder.3D printer extruderRetrofit kit for single-extruder direct-drive machines, such as the Wanhao Duplicator i3 (and PLUS), Monoprice Maker Select, or Makerbot rep2 (see pulldown menu). The Flexion extruder will allow full-speed printing of


[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.
By Gulfcoast Robotics
In Stock
$12.99
$10.99
You Save: 15%

mpn: NTC3950_CWM, ean: 0719104609551,

4.5 out of 5 stars with 134 reviews
Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor. NTC 3950 HEX thermistor features: M3x0.5 threaded stud to use in place of M2 clamping



Viewing Page 1 of 6

View more products in Additive Manufacturing Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - eliteapprenticeships.com. All Rights Reserved.